Nomaco Nomaply Insulation Sheet

Description


NOMAPLY™ Sheet Insulation is a flexible, polyethylene, thermal insulation. It is available in black or white and in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8" thru 2-1/2". Standard roll width is 48" available in the same thickness.



Applications

NOMAPLY™ Sheet Insulation is used to retard heat flow and provide condensation control on large diameter piping, tanks, vessels and equipment.



NOMAPLY™ Sheet Insulation has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -330°F and 200°F (-201°C and 99°C). It can be installed in commercial, industrial and residential insulation projects.



Installation

When NOMAPLY™ Sheet Insulation is applied to equipment, use 100% coverage of 320 or 620 Contact Adhesive or other approved adhesive system. Since it is a contact adhesive, both surfaces to be joined should be coated and then joined after adhesive is dry to the touch. Compression joints with adhesive applied should be used on all butt edges. Refer to Installation Guidelines for specific instructions.



Outdoor Applications

NOMAPLY™sheet insulation is made from UV resistant polyolefin resins. For severe UV exposure (rooftop applications) or where optimum performance is required, the product must be protected. Various jacketing or cladding materials are recommended, i.e. PVC, CPVC, AL, etc. If coatings are going to be used, please refer to the technical bulletin for recommended coatings.



Resistance to Moisture Vapor Flow

The closed-cell structure of NOMAPLY™ Sheet Insulation effectively retards the flow of moisture vapor and is considered a low transmittance vapor retarder. For most applications, NOMAPLY™ Sheet Insulation needs no additional protection.



Additional vapor barrier protection may be necessary for NOMAPLY® Sheet Insulation when installed on low temperature surfaces that are exposed to continuous high humidity.



Flame and Smoke Rating

NOMAPLY™ Sheet Insulation in wall thicknesses of 1" (25 mm) and below has a flame spread rating of 25 or less and a smoke development rating of 50 or less as tested by ASTM E 84 Method of Testing entitled: “Surface Burning Characteristics of Building Materials.”



Numerical flammability ratings alone may not define the performance of products under actual fire conditions. They are provided only for use in the selection of products to meet limits specified, when compared to a known standard.



Specification Compliance

• ASTM C 1427, Type 2, Grade 1

• New York City OTCR #13-09

• USDA Requirements

• ASTM E 84 1" 25/50-tested according to UL 723 and NFPA 255

• Complies with requirements of CAN/ULC S102-M88

• UL94 HF-1 File #E147665

• UL723 File #R-22380

• CFC/HCFC Free

• Low VOCs

• Halogen Free

• Non-porous

• Fiber Free

• Resistant to mold growth

• Sound transmission co-efficient = 11 at 1" per ASTM E 90